Panasonic WV-CLR920A - Manual (Page 27)

-27-
• Installation of Software for RS-485 Communi-
cation
1. Insert the Install Disk 1 to the C drive.
2. Input command as follows.
C:\SETUP .
The installation starts.
3. See the supplement of operating instructions for
RS-485 Communication.
4. When the installation is completed, the window that
says "485_GUI Set up was completed successfully"
appears on the monitor screen.
5. After installation of "485_GUI Set up", and set the
RS485 communication parameters.
* The GUI stands for Graphical User Interface.