Panasonic A210 - Manual (Page 40)

37
Messages
Setting the Message centre number
Your connection settings must be configured before using the
service. The Message centre number may be preprogrammed.
Changing this number may cause failure of a text message.
d
Main menu > Messages > Settings > Message centre
1. Enter your Message centre number in the international dialling
format 7 [5] (OK) (See “International dialling” on page 23.)
Other SMS settings
d Main menu > Messages > Settings
1. [192] to scroll to the required setting 7 [5] (Select)
Protocol
Select the protocol type which specifies the format your
message is converted to.
[192] to scroll to Standard text, Fax, X.400, Paging,
ERMES or E-mail 7 [5] (Select)
Illumination
Decide whether or not you want the Indicator light to be
illuminated when receiving or viewing an Illumination
message.
[192] to scroll to Receiving or Viewing 7 [
5 ]
(Change) to switch on/off
Validity period
Set the validity period that the message is stored at the
Message centre.
[192] to scroll to 1 hour, 12 hours, 1 day, 1 week or
Maximum 7 [5] (Select)
Delivery
report
Choose whether or not you want to receive a confirmation
that your message has been delivered.
[5] (Select) to switch on/off
SMS via GPRS
Decide whether or not you want to send your message via
GPRS.
[5] (Select) to switch on/off