Philips SPC530NC - Manual (Page 26)

Using my Philips WebCam makes my PC /
laptop run slow.What should I do?
1 Close software applications that do not necessarily need to
run.
2 Click the VProperty icon ‘ ’ in the Windows taskbar, bottom
right of your screen;
> The General settings screen appears.
3 Click the Video tab.
> The Video settings screen appears.
4 Check whether Full automatic control is enabled (box
checked). If enabled, disable Full automatic control by
dischecking its box.
5 Set Frame rate to a minimum of 5 fps.
6 Click ‘OK’ to save your settings.
Note!
The maximum frame rate (frames per second (fps) produced by the
WebCam) and the maximum image resolution depend on the
specifications of your PC / laptop. The WebCam software will
automatically adjust frame rate and resolution as good as possible for
your particular situation. It might be possible that the specifications of
your PC / laptop do not meet the requirements for maximum frame
rate and resolution setting.
Frequently asked questions (FAQ) EN
26