beautypg.com

Figure 16, Figure 17 – ParaBody 883 User Manual

Page 26

background image

STEP 16:

FIGURE 16

PULLEY
PLATES

• Route the previously removed original LAT CABLE through the FRAME (1) and assemble one 3-1/2” PULLEY to the PULLEY

PLATES using one existing 3/8 X 1-3/4” BOLT and one exsisting 3/8” LOCK NUT. See FIGURE 16.

26

PULLEY

LAT CABLE

STEP 17:

FIGURE 17

• Securely assemble the LAT CABLE to the THREADED HOUSING (24) then assemble the THREADED HOUSING (24) to the

BOOM BRACKET using one previously removed 3/8 X 3-3/4” BOLT, two previously removed 3/8 X 1” SPACERS and one previ-
ously removed 3/8” LOCK NUT as shown in FIGURE 17.

LAT CABLE

24