Panasonic KX-TG6700 - Manual (Page 47)

Answering System
For assistance, please visit http://www.panasonic.com/phonehelp 47
Answering system
settings
Ring count
You can change the number of times the
phone rings before the unit answers calls.
The default setting is “4”.
“Toll saver”: The unit answers on the
2nd ring when new messages have been
recorded, and on the 4th ring when there
are no new messages. If you call your
phone from outside to listen to new
messages (page 45), you will know that
there are no new messages when the
phone rings for the 3rd time. You can then
hang up without being charged for the call.
1 {MENU} i {0}{6}{1}
2
Select the desired line.
3
Select the desired setting. i {SAVE}
i {OFF}
For Voice Mail service subscribers
If you subscribe to a flat-rate service
package that includes Caller ID, Call
Waiting, Voice Mail, and unlimited local/
regional/long distance calls, please note
the following:
L To use the Voice Mail service provided
by your telephone service provider
rather than the unit’s answering system,
turn off the answering system (page 40).
This unit does not have an indicator to
indicate if there are new messages in
your mailbox service.
L To use this unit’s answering system
rather than the Voice Mail service
provided by your telephone service
provider, please contact your telephone
service provider to deactivate your Voice
Mail service.
If your telephone service provider
cannot do this:
– Set this unit’s “Ring count” setting
so that this unit’s answering system
answers calls before the Voice Mail
service of your telephone service
provider does. It is necessary to check
the ring count required to activate the
Voice Mail service provided by your
telephone service provider before
changing this setting.
– Change the ring count of the Voice
Mail service so that the answering
system can answer the call first. To do
so, consult your telephone service
provider.
Caller’s recording time
You can change the maximum message
recording time allotted to each caller.
The default setting is “3min”.
“Greeting only”: The unit plays the
greeting message but does not record
caller messages.
1 {MENU} i {0}{6}{2}
2
Select the desired line.
3
Select the desired setting.
i {SAVE}
i {OFF}
Handset
Handset