Panasonic KX-TG6700 User Manual

Page 39

Programming

For assistance, please visit http://www.panasonic.com/phonehelp

*1 If you program these settings using one of the handsets, you do not need to program

the same item using another handset.

*2 If you set the line selection mode from “Auto” to “Line1” or “Line2” (page 20), the

auto talk feature will function for that line only. If the other line receives a call, the auto
talk feature does not function.

*3 If you subscribe to Caller ID service and want to view the caller’s information after lifting

up the handset to answer a call, turn off this feature.

*4 This tone lets you know when you receive a call while you are on the other line, on an

intercom call, or monitoring a room. If you select “On”, the tone sounds repeatedly for
as long as the line rings. If you select “2”, the tone only sounds 2 times.

*5 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing

any keys, including confirmation tones and error tones.

*6 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone

(tone 1 to 4). If you select a melody, you cannot distinguish lines by their ringers.

*7 The flash time depends on your telephone exchange or host PBX. Consult your PBX

supplier if necessary. The setting should stay at “700ms” unless pressing

{FLASH}

fails to pick up the call waiting call.

*8 Generally, the line mode setting should not be adjusted. If

k or l is not displayed

on the handset or the LINE1 or LINE2 indicator on the base unit does not light properly
when another phone connected to the same line is in use, you need to change the line
mode to “A”.

Set flash time

*1*7

Line1

{0}{5}{2}{1}

{1}: <700ms>

{2}: 600ms {3}: 400ms

{4}: 300ms {5}: 250ms

{6}: 110ms {7}: 100ms

{8}: 90ms

–

Line2

{0}{5}{2}{2}

Set line mode

*1*8

Line1

{0}{5}{3}{1}

{1}: A {2}: <B>

–

Line2

{0}{5}{3}{2}

Voice enhancer

{5}

{1}: On {0}: <Off>

Feature

Feature code

Setting code

Page