Panasonic KX-TG6700 - Manual (Page 31)

Base Unit Speed Dialer
For assistance, please visit http://www.panasonic.com/phonehelp 31
Base unit speed dialer
You can assign one phone number to each
of the 10 dial keys (
{0} – {9}) on the base
unit.
Adding phone numbers to the
speed dialer
Important:
L Before adding phone numbers, make
sure the base unit is not being used.
1 {PROGRAM}
2
Enter the phone number (max. 32
digits).
L If a pause is required for dialing,
press {PAUSE} where needed.
L If you misdial, press {STOP} and
repeat from step 1.
3 {PROGRAM}
4
Press a dial key ( {0} – {9}).
Note:
L If a phone number is assigned to a dial
key which already contains a phone
number, the old number will be erased.
L We recommend you make a note of
which phone numbers are stored in
which dial keys.
PAUSE button (for PBX/long distance
service users)
A pause is sometimes required when
making calls using a PBX or long distance
service.
For example, if you need to dial the line
access number “9” when making outside
calls with a PBX:
In step 2, press
{9}, {PAUSE}, then enter
the phone number.
Note:
L A 3.5 second pause is inserted each
time {PAUSE} is pressed. Press
repeatedly to insert longer pauses. “
P”
is displayed when {PAUSE} is pressed.
L When {*} is pressed, “$” is displayed.
When {#} is pressed, “#” is displayed.
To erase a stored phone number
1
Press {PROGRAM} 2 times.
2
Press the desired dial key (
{0} – {9}).
Calling someone with the speed
dialer
1 {SP-PHONE} i {AUTO}
2
Press the desired dial key (
{0} – {9}).
Note:
L Speed dial numbers assigned to the
base unit dial keys can only be dialed
from the base unit.