Pioneer PDP-614MX External Control Manual RS-232C - Manual (Page 2)

PDP-614MX External Control Manual
Application
These specifications are applicable to plasma monitors and communications control from external equipment.
Connections
Connections should be made as described below.
plasma monitor
External equipment
e.g., Personal computer
1) Connector on the plasma monitor side: EXTERNAL CONTROL connector.
Type of connector: D-Sub 9-pin male
No. Pin Name
1 No
Connection
2 RXD (Receive data)
3 TXD (Transmit data)
4 DTR (DTE side ready)
5 GND
6
DSR (DCE side ready)
7 RTS (Ready to send)
8 CTS (Clear to send)
9 No Connection
2