Philips DVP3345V/F7 - Manual (Page 14)

English
14 First-time DVD/VCR Setup
3 Press K or L to select ENGLISH, FRANCAIS
(French) or ESPAÑOL (Spanish) as the language for
VCR On-Screen Displays and menus. Then, press B.
● To put the DVD/VCR in VCR mode, press VCR so VCR
light appears.
• To skip this feature and play a
tape immediately, insert a tape
with its record tab removed.
• Repeat this process if the power
fails.
Helpful Hints
Before turning on your DVD/VCR, make sure batteries are in the
remote control and the DVD/VCR and TV are connected correctly.
These menus may not appear if you have already turned
on the DVD/VCR.
1 Turn on the TV. Set it to the correct Video In
channel. (Check your TV owner’s manual for details.)
2 Press y. VCR light will appear on the front of the
DVD/VCR. The display shown below will appear.
These menus may not appear if you have already turned on
the DVD/VCR. You may have turned on the DVD/VCR
before to find the Audio/Video In channel of the TV, for
example. If so, follow the steps on page 20 to select a
language for the VCR menus.
1
Turn on the TV.
DVD VCR SETUP
INPUT MENU
REC SPEED MODE
ANGLE SEARCH REPEAT
DISPLAY SUBTITLE ZOOM
TIMER SET
REPEAT
A-B
AUDIO
BACK PAUSE STOP
PLAY
OK
FFW REW
CLEAR TITLE
DISC
TRACKING
OPEN/CLOSE
1 2
6 5 4
7 8 9
0 +10
3
2
3
LANGUAGE SELECT
B ENGLISH [ON]
FRANCAIS
ESPAÑOL
PUSH B
E8E21UD_EN1.qxd 09.1.23 2:42 PM Page 14