Polaris Trail Boss 330 Quadricycle - Manual (Page 90)

88
MAINTENANCE AND LUBRICATION
Lights
Taillight/Signal Light Replacement
1. Place the transmission in gear.
2. Lock the mechanical parking
brake.
3. Rotate the taillight socket
counterclockwise to remove it.
4. Remove the lamp.
5. Apply dielectric grease to the
socket.
6. Install the new lamp.
7. Test the lamp for proper
operation.
8. Reinstall all components in reverse order.
9. Rotate the turn signal socket
counterclockwise to remove it.
10. Remove the lamp.
11. Apply dielectric grease to the
socket.
12. Install the new lamp.
13. Test the lamp for proper operation..
14. Reinstall all components in reverse order.
Indicator Lamp Replacement
1. Remove the instrument panel.
2. Using a small, straight-blade screwdriver, turn the base of the bulb
1/4 turn counterclockwise.
3. Remove the lamp. Use a needle-nose plier or similar tool.
4. Install the new lamp. Turn the lamp clockwise 1/4 turn.
5. Reinstall the instrument panel.
F N R