beautypg.com

General information controls – Philips BC 8310 User Manual

Page 5

background image

English

5

Battery condition indicator
Indicates the energy level of the
rechargeable batteries during operation.
3 levels indicate the condition of the
rechargeable batteries. 3 LED’s: batteries
full, 2 LED’s: batteries half full, 1 LED:
batteries empty.

Multiple speakers with one
transmitter
An additional number of wireless speakers
can be used with a single transmitter if they:
- operate in the 864 MHz band
- can detect a 19 kHz pilot tone.

Please consult the appliance’s electrical
specification sheets for confirmation on
compatibility.

Kit contents

This FM speaker system consists of the
following accessories:

1 x SBC BC8310 FM speaker

1 x SBC CS020/00 9 Volt/1000 mA
AC/DC adapter

8 x rechargeable batteries LR6/AA (NiCd),
1000 mAh

Speaker (figure 1)

1 Charge indication LED – lights up

when batteries are being charged.

2 Battery condition indicator – 3 levels

indicate the condition of the rechargeable
batteries. 3 LED’s: batteries full, 2 LED’s:
batteries half full, 1 LED: batteries empty.

3 Power indication LED

lights up when speaker is switched on.

4 Dynamic Bass Boost indicator

lights up when DBB is switched on

5 Dynamic Bass Boost on/off

push the button to switch on/off

6 Volume control

adjust volume to your desired listening level

7 Power On/Off – push the button to

switch the speaker on/off.

8 Battery cover

9 Tuning – turn the tuning wheel until the

signal is at its clearest.

10 DC power – connect to the 9 Volt/1000

mA AC/DC adapter

11 L/ L+R/ R switch – switch the L/ L+R /R

switch to L+R when only using one speaker.
Switch to L or R for left or right use when
using two speakers.

12 Controls plate

General information

Controls

XP SBC BC 8310/00-1.1 20-08-2001 13:44 Pagina 5