POLAR CE3.7 - Manual (Page 38)

38 SMOOTH CE3.7 Elliptical
Visit us at : www.smoothfitness.com
COMPUTER OPERATION
P4: RANDOM program
After the user has selected “P4- RANDOM program”, The TIME will show the workout time setting of “32:00”, Press the ““UP
/DOWN” button to adjust workout time, Then press the “ENTER” to confirm. Press the “START” button to begin the exercise
program. This program consists of 16 segments if the time entered exceeds 16 minutes the time is averaged over the 16
segments. The resistance display will show “1”. To increase or decrease the resistance while exercise, press the “UP/DOWN”
button. The target time will count down, the DISTANCE and CALORIES will count up from 0.
To pause the program while exercising, press the “STOP” button, To quit out the program, press the “STOP” button twice. At the
end of the program when the target has been achieved, the computer will beep.
P5: Fat burning program
After the user has selected “P5 Fat burning program “, the TIME display will show the workout time setting of “32:00”, press the
“UP /DOWN ” button to adjust workout time then press “ENTER” to confirm. Press the ”START” button to begin the “Fat burning
program ”. This program has a 60 minute limit all segments are 1 minute each.
The aim of a FAT BURNING program is to exercise for a longer period of time at a reduced level of intensity. This will allow you to
burn more calories than if you were using a program that has higher levels of resistance over a shorter period of time.
The RESISTANCE display will show “1”. To increase or decrease the resistance while exercising, press the “UP/DOWN” button.
The target time will count down, the DISTANCE, CALORIES display will count up from 0.
To pause the program while exercising, press the “STOP” button. To quit the program, press the “STOP” button twice. At the end
of the program when the target has been achieved, the computer will beep.
P6: INTERVAL program
LEVEL
After the user has selected “P6 INTERVAL program”, The SPEED display will show “L1”
Press the “UP and DOWN” button to adjust the Level from “L1” to “L8”, press the “ENTER” button to continue the program.
TIME
After you have set up the Level, press the “ENTER” button, The TIME display will show the workout time setting of “32:00 ”, press
the “UP and DOWN ” button to adjust the TIME, press the “ENTER ” button to confirm. This program consists of 16 segments if
the time entered exceeds 16 minutes the time is averaged over the 16 segments.
Press the “START” button to begin the exercise program .The RESISTANCE display will show the Level the user has set. To
increase or decrease the resistance while exercising, press the “UP/DOWN” button. The time will count down to the end. The
DISTANCE and CALORIES display will count up from 0.
To pause the program while exercising, press the “STOP” button. To quit the program, press the “STOP” twice. At the end of
program count when the target has been achieved the computer will beep.