Introduction of audio adjustments, Audio adjustments – Pioneer DVH-P5650MP User Manual

Page 56

Introduction of audio

adjustments

1 4

3 5

5 6

1 Preset equalizer indicator

Shows which equalizer preset is currently

selected.

When CUSTOM is selected, equalizer curve

does not display.

2 SFEQ indicator

Appears in the display when SFEQ function

can be activated.

3 EQ-EX indicator

Appears in the display when EQ-EX function

can be activated.

4 CUSTOM indicator

Shows when custom equalizer curve is cur-

rently selected.

5 Loudness indicator

Appears in the display when loudness is

turned on.

6 SW indicator

Shows when the subwoofer output is turned

on.

7 Audio display

Shows the audio adjustments status.

Important

If the multi-channel processor (DEQ-P7650) is
connected to this unit, the audio function will be

changed into the multi-channel processors
audio menu. For details, refer to Introduction of
DSP adjustments on page 63.

% Press A to display the audio function

names.

Press A repeatedly to switch between the fol-

lowing audio functions:

FAD (balance adjustment)EQ (equalizer

curve adjustment)B (bass and treble level

adjustment)LOUD (loudness)SUB, W

(subwoofer on/off setting)/NOFAD (non fading

output on/off setting)80: 0 (subwoofer set-

ting)/NOFAD (non fading output setting)

HPF (high pass filter)SLA (source level ad-

justment)

# If EQ-EX function has been selected and only
when EQ-EX is turned on and CUSTOM is se-
lected as the equalizer curve, you can switch to
B.
# When the subwoofer controller setting is only
P/O :FUL, you cannot switch to SUB, W. (Refer to
page 83.)
# You can select the 80: 0 only when subwoofer
output is turned on in the SUB, W.
# When the subwoofer controller setting is only
P/O :FUL, you can switch to the nonfading out-
put on/off setting. (Refer to page 83.)
# You can select the nonfading output setting
only when nonfading output is turned on in the
nonfading output on/off setting.
# When selecting the FM tuner as the source,
you cannot switch to SLA.
# To return to the display of each source, press
BAND.

Note

If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.

Audio Adjustments

Section