Mlisten, Mlisten(1), Synopsis – PAR Technologies PARASTATION5 V5 User Manual
Page 85: Description, Options, See also

ParaStation5 Administrator's Guide
81
mlisten
mlisten
—
display multicast pings from the ParaStation daemon psid(8)
Synopsis
mlisten [-dv?] [-m
MCAST
] [-p
PORT
] [-n
IP
] [-#
NODES
] [--usage]
Description
Display the multicast pings the ParaStation daemon psid(8) is emitting continuously. These pings are
displayed by spinning bars.
Each ping received from node N lets the Nth bar spin around one more step. For each node never received
a multicast ping from a '.' is displayed.
ParaStation by default no longer uses multicast messages. Thus, no multicast
messages will be ever received and displayed using the default configuration!
Options
-d
, --debug
Activate the debugging mode. This will disable the spinning bars. Instead a detailed message about
each received multicast ping is displayed.
-m
, --mcast=MCAST
Listen to multicast group
MCAST
. Set this to the value of
MCastGroup
in the ParaStation configuration
file parastation.conf(5). The default is 237, which is also the default within psid(8).
-p
, --port=PORT
Listen to UDP port
PORT
. Set this to the value of
MCastPort
in the ParaStation configuration file
parastation.conf(5). The default is 1889, which is also the default within psid(8).
-n
, --network=IP
Listen on the network interface with address
IP
. The default is to listen on any interface.
IP
is the IP
address of the network interface in dot notation.
-#
, --nodes=NODES
Display information for
NODES
nodes. The default is 128, i.e. 128 nodes.
-v
, --version
Output version information and exit.
-?
, --help
Show a help message.
--usage
Display a brief usage message.
See also