Philips 21PV320/05 - Manual (Page 22)

Switching the remote control command
If you have two machines with the same remote control
command, you can change the remote control command of the
handset and the remote control command of your TV-VIDEO
Combi.
a Press the MENU button. The main menu appears.
b Select the line ’ Setup ’ with the menu buttons B or
A and confirm with the menu button C .
SETUP
Parental control ON
Display MAX
Format 16:9 Normal
VCR 1/2 VCR 1
ã Exit:
« press MENU
c Select the line ’ VCR 1/2 ’ with the menu buttons B
or A .
d Select ’ VCR 1 ’ or ’ VCR 2 ’ with the menu buttons
D or C
e Confirm with the OK button.
f On the remote control, press the STOP h button and the
digit button 2 or 1 at the same time to switch the
remote control to ’ VCR 2 ’ or ’ VCR 1 ’.
g Confirm with the STOP h button.
h To end, press the MENU button.
D After you changed the batteries in the remote
control, it will switch back to ’ VCR 1 ’.
Continuous playback
You can automatically play a cassette again and again. When
the end of the tape or the recording has been reached, it will
rewind and start again.
a Press the MENU button. The main menu appears.
b Select the line ’ Tape ’ with the B or A button.
Confirm with the C button.
TAPE
Tape speed SP
Tape counter USED
Repeat play OFF
Jitter N. ACT.
Tracking (,,,,,,,,=,,,,,,$
Cleaning
ã Exit:
« press MENU
c Select the line ’ Repeat play ’ with the B or A
button.
d Select ’ ON ’ with the D or C button. If you select
’ OFF ’, the function will be switched off.
e Confirm with the OK button.
f Press the MENU button.
20