Philips 21PV320/05 - Manual (Page 18)

D If ’
Daily error ’ appears on the TV screen, the
date was incorrectly entered.
D Under ’
VPS/PDC ’, use the B or A button to
switch ’VPS or PDC’ on or off.
D Under ’
LP ’, use the B or A button to select the
recording speed ’SP’ or ’LP’.
D The TIMER lamp on the front of the set will light up
when one or more of the TIMER blocks are
occupied.
D When you are recording, the red recording light at
the front of the TV-VIDEO Combi will be alight.
D If the end of the cassette is reached during a
recording, the TV-VIDEO Combi automatically ejects
the cassette.
D If you forget to load a cassette, ’
No cassette ’
will appear.
D If you inserted a cassette with erase protection
when you want to start a recording, the cassette will
be ejected.
f Press the OK button.
g Confirm the message on the screen with the OK button.
A TIMER recording can only start, if the set is not used for
other video recorder functions (e.g. playback).
h To end, press the TIMER s button.
Programming a recording
(without ’VIDEOPlus’)
a Press the TIMER s button on the remote control.
b Select the line ’ Timer programming ’ with the
buttons B or A and confirm with the C button.
TIMER PROGRAMMING
VPS
DATE PROG. START END LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
-- -- --:-- --:-- - - -----
ã Exit: Start:
« press TIMER press è
c Press the OK button.
TIMER PROGRAMMING
VPS
DATE PROG. START END LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx 15:36 15:50 - * ONCE
ã Exit: Start:
« press TIMER press è
d Select the entry field with the D or C button.
e Enter information with the buttons B or A or with the
digit buttons 0-9 .
D Under ’
REP. ’, use the B or A button to select
daily or weekly programming.
’
Mo-Fr ’: If you want to make a recording every day
from Monday to Friday.
’
Mo-Su ’: If you want to make a recording every day
from Monday to Sunday.
’
WEEKL ’: If you want to make a recording every
week on the same day of the week.
’
ONCE ’: If you want to make only one recording.
D If you want to make a TIMER-recordings from an
external source, use the B or A button to select
the setting ` Record prepared ` in the entry
field ` PROG. `. Your TV-VIDEO Combi will now be
controlled via the scart cable.
D Under ’
LP ’, use the B or A button to select the
recording speed ’SP’ or ’LP’.
D Under ’
VPS/PDC ’, use the B or A button to
switch ’VPS or PDC’ on or off.
f Confirm with the OK button when the information is
correct.
g Confirm the message on the screen with the OK button.
A TIMER recording can only start, if the set is not used for
other video recorder functions (e.g. playback).
D The programming information has been stored in a
TIMER block.
h To end, press the TIMER s button.
i Make sure that the cassette you have put in can be
recorded on.
16