PYLE Audio PICD65I User Manual
Page 8
E-15
- INCLUDED 1 PC STAND FOR THE MAIN UNIT.
FIXING THE BASE TO THE UNIT:
WHEN THE
INDICATOR MARK
ON THE STAND
IS ALIGNED
WITH THE LOCK
SYMBOL , THE
BASE IS
PROPERLY
IS PROPERLY
INSTALLED.
SYSTEM SET UP PROCEDURE
AS A "SHELF SYSTEM" (TABLE TOP USE)
1. PLACE THE STAND UNDER
THE UNIT.
2. SLIDE THE STAND UPWARD
(SEE DIAGRAM BELOW).
3. STOP WHEN THE INDICATOR MARK ON THE STAND IS ALIGNED WITH
THE LOCK SYMBOL ON THE REAR CABINET.
(TO RELEASE THE STAND FROM THE UNIT , SLIDE THE STAND DOWNWARDS
(OPPOSITE DIRECTION) UNTIL IT BECOMES RELEASED.
CLICK
LOCKED
INDICATOR MARK
LOCK SYMBOL