Philips Colour Observation Camera - Manual (Page 2)

5
1 Focus adjustment ring
2 Back-focus adjustment ring
3 Camera sound on/off
4 Auto-iris socket
5 Cable length compensation selector
6 System cable socket
7 External supply socket
This chapter describes the installation of the camera. For more detailed information about the installation
and operation of the system monitor you should consult the monitor manuals.
Remarks:
* When the system configuration is altered, the system monitor needs to check and memorise the cameras
and accessories connected to its inputs. This is done automatically when the power is switched on (rear
switch).
* This system uses a 4 wire twisted pair telephone type cable. The use of the correct twisted pair cable can
be critical to operation, especially at larger cable lengths.
Caution: Never touch the glass of the camera lens as this may cause damage.
CL 66610005_310b.AI
1
R
A E N > <
R
A
F
2
CL 66610005_311b.AI
200m
0-50m
100m
300m
0 X 1
24V
+ 0 -
6
7 3
4 5
Connection and operation facilities
Installation