Panasonic DMP-BDT215 - Manual (Page 8)

8 VQT3B58
STEP 1 : Connecting to a TV
≥ Do not place the unit on amplifiers/receivers or equipment
that may become hot. The heat can damage the unit.
≥ Before making any connections we suggest you
temporarily disconnect all the units from AC power.
≥ Do not connect video signals through a video recorder.
Due to copy guard protection the picture may not be
displayed properly.
≥ Please use High Speed HDMI Cables that have the HDMI
logo (as shown on the back cover). It is recommended that
you use Panasonic’s HDMI cable. When outputting 1080p
signal, please use HDMI cables 5.0 meters (16.4 ft.) or
less.
Recommended part number (High Speed HDMI Cable):
RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.),
RP-CDHS50 (5.0 m/16.4 ft.), etc.
LAN
10BASE-T/100BASE-TX
AUDIO OUT VIDEO OUT
R L
AV OUT MAIN AV OUT SUB COMMUNICATION CAMERA
WIRELESS LAN
ADAPTOR
COMMUNICATION
CAMERA
LAN
10BASE-T/100BASE-TX
COMMUNICATION CAMERA LAN
10BASE-T/100BASE-TX
Back of the unit
[BDT310]
[BDT215]
[BDT210]
[BDT110]
∫ Via an HDMI AV OUT terminal (High quality)
– [BDT310] : Use HDMI AV OUT MAIN terminal.
– It is possible to play back 3D videos and 3D still
pictures by connecting this unit with a 3D compatible
TV.
∫ Via a VIDEO OUT terminal (Standard quality)
≥ Set “HDMI Audio Output” to “On” ( 32).
≥ The HDMI connection supports VIERA Link “HDAVI
Control” ( 26).
≥ Connect terminals of the same color.
LAN
10BASE-T/100BASE-TX
AV OUT MAIN AV OUT SUB
COMMUNICATION
CAMERA
HDMI IN
HDMI cable
(Only supplied with
DMP-BDT215)
AUDIO OUT VIDEO OUT
R L
COMMUNICATION
CAMERA
Audio/Video cable
DMP-BDT110_210_VQT3B58_eng.book 8 ページ ２０１１年５月１７日 火曜日 午後４時４３分