Panasonic DMP-BDT215 - Manual (Page 12)

12 VQT3B58
STEP 4 : Connecting to
an AC power source
≥ This unit consumes a small amount of AC power ( 39)
even when turned off. In the interest of power
conservation, if you will not be using this unit for an
extended period of time, it can be disconnected.
STEP 5 : Settings
After connecting your new player for the 1st time and
pressing the power button, a screen for the basic settings
will appear.
Preparation
Turn on the television and select the appropriate video
input on the television.
1
Press [ Í POWER].
Setup screen appears.
If this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 2 or later via an HDMI cable,
then setting information on the TV such as “On-screen
Language” is acquired by this unit.
2
Follow the on-screen instructions and
make the settings with [ 3, 4] and press
[OK].
After completing “Easy Setting”, you can perform “Network
Easy Setting”.
≥ You can perform this setup anytime by selecting “Easy Setting” in the
Setup menu. ( 33)
Touch Free Sensor [BDT310] [BDT215] [BDT210]
By setting “Sensor” in “Touch Free Sensor” to “On”, you can open or close
the tray just by waving your hand over the TOUCH-FREE SENSOR on the
upper side of the unit. (This will also work when in stand-by.)
≥ Be aware that the TOUCH-FREE SENSOR may function unintentionally
in the following cases:
– When your hand or arm, an object, a small child, or a small animal
comes close to the upper part of the unit
– When an object is placed on top of the unit and vibration is applied
– When connecting a cable etc. to the rear of the unit
≥ Reactive distance of the sensor is automatically set in accordance with
the installation conditions at the time of power supply connection and
when the open/close button is pressed. To prevent an incorrect setting,
do not place your hands or objects above the unit at these times.
≥ Depending on the usage conditions, the TOUCH-FREE SENSOR may
stop working or the reactive distance may become shorter. In such
cases, press the tray open/close button once.
[For_units_with_PX_printed_on_the_outer_packaging]
If the power plug does not fit
your AC outlet, use the power
plug adaptor (supplied).
If it still doesn’t fit, contact an
electrical parts distributor for assistance.
Install this unit so that the power cord can be unplugged from the
socket outlet immediately if any problem occurs.
COMMUNICATION
CAMERA
AUDIO
R
AC power supply cord
(supplied)
To a household AC outlet
Easy Setting
DMP-BDT110_210_VQT3B58_eng.book 12 ページ ２０１１年５月１７日 火曜日 午後４時４３分