Palsonic TFTV812U - Manual (Page 13)

Connections
10
Video
cable
or
VCR
Rear of the VCR
S-video
cable
Audio
cable
Connect a VCR
How to connect:
Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR.
Note:
For better video, you can use the S-Video terminal if your source supports it.
The unit chooses the S-Video signal prior to the Video signal.
The Video input terminal on the AV IN(2) and the S-Video input terminal share the
same Audio input terminals.
To play VCR
1. Turn on your LCD TV, press Source button on the remote control.
2. Press Source button repeatedly to select AV2/SV. Note that the period of
two-press should be within 2 seconds.
3. Turn on your VCR, insert a video tape and press the Play button.
Carefully check the terminals for position and type before making any connections.
The illustration of the external equipment may be different depending on your model.
Loose connectors can result in image or colour problems. Make sure that all connectors are securely inserted
into their terminals.
Refer to the operating manual of the external device as well.
When connecting an external device, turn the power off on the panel to avoid any issues.
Cautions before connecting
Yellow (VIDEO)
White (AUDIO L/MONO)
Red (AUDIO R)
ANTENNA INPUT
HEADPHONE
AV1 INPUT/
S-VIDEO IN
AV2 INPUTS
AV OUT