Pioneer VSX-515-S/-K - Manual (Page 66)

Controlling the rest of your system 11
66
En
Certain buttons represent operations that
cannot be learned from other remote controls.
The buttons available are shown below:
6 To program additional signals for the
current component repeat steps 4 and 5.
To program signals for another component,
exit and repeat steps 1 through 5.
7 Press the RECEIVER button to exit and
store the operation(s).
Erasing one of the remote
control button settings
VSX-915 model only
This erases one of the buttons you have
programmed and restores the button to the
factory default.
1 While pressing the RECEIVER button,
press and hold the 1 button.
The remote LCD display shows SETUP .
2 Press the MULTI CONTROL button
corresponding to the button setting to be
erased.
The LCD on the remote displays the
component.
3 Use / (cursor left/right) to select
ERASE then press ENTER .
The LCD display flashes PRES KEY .
4 Press and hold the button to be erased for
two seconds.
The LCD display shows OK or NO CODE to
confirm the button has been erased.
5 Repeat step 4 to erase other buttons.
6 Press the RECEIVER button when you’re
done.
Erasing all of the remote control
presets
This will erase all preset remote control preset
codes and (VSX-915 model only) programmed
buttons.
1 While pressing the RECEIVER button,
press and hold the 1 button.
The remote LCD display shows SETUP .
2 Press the DVD/LD MULTI CONTROL
button.
3 Use / (cursor left/right) to select
RESET then press and hold ENTER for about
two seconds .
The LCD shows OK to confirm the remote
presets have been erased.
Direct function
• Default setting: ON
You can use the direct function feature to
control one component using the remote
control while at the same time, using your
receiver to playback a different component.
This could let you, for example, use the remote
control to set up and listen to a CD on the
receiver and then use the remote control to
rewind a tape in your VCR while you continue
to listen to your CD player.
+10
FL DIMMER SR
DISC
RECEIVER
MULTI CONTROL
SOURCE INPUT
SELECT
ENTER
DVD/LD TV/SAT DVR/VCR TV CONT
CD
ST ST
CD-R/TAPE TUNER RECEIVER
ENTER
D.ACCESS
TOP MENU
DTV MENU
CLASS
MENU
BAND
RETURN GUIDE
T.EDIT
SYSTEM
SETUP
TUNE
TUNE
TV CONTROL
RECEIVER CONTROL
SHIFT
VOL
THX
SLEEP DIALOG E
AUTO SURR
STANDARD ADV.SURR STEREO
INPUT
SELECT TV CH
DTV ON/OFF
TUNER
DISPLAY
MPX
AUDIO
CH RETURN
SUBTITLE
MIDNIGHT/
LOUDNESS
SIGNAL
SELECT
EFFECT
/CH SEL
ACOUSTIC
EQ
DTV INFO REC MUTE
TV VOL
REC STOP
HDD
CH CH
DVD
RETURN GUIDE
RECEIVER
VSX_815-915.book.fm 66 ページ ２００５年３月１日 火曜日 午前１０時２２分