Palsonic 76WSHDA - Manual (Page 33)

Notes:
When the HD monitor gets signal from external equipment (such as Set top box, computer, DVD, etc.)
through XGA interface, because of signal difference, the screen colour may not be in optimum state,
this time, you can adjust and item in the SCREEN ADJUST menu until you get satisfying
colour.
Using or can restore the value of and to default setting.
Balance pincushion distortion.
Adjust the picture's horizontal size.
OSD menu introduction & Operation examples
OSD menu introduction (continued)
31
?
9300
6500
EXIT
CONTRAST Adjust the picture contrast.
BRIGHTNESS Adjust the picture brightness.
H-SIZE
H-PHASE Adjust the horizontal position of the picture.
V-SIZE Adjust the picture's vertical size.
V-PHASE Adjust the vertical position of the picture.
PIN-BALANCE
PINCUSHION Pincushion correction.
TRAPEZOID Correct the trapezoid distortion.
PARALLELOGRAM Adjust the angle between horizontal and vertical.
H-MOIRE Eliminate horizontal moire.
V-MOIR Eliminate vertical moire.
ROTATION Rotate the current picture.
RECALL To restore to original factory preset mode.
ENGLISH/CHINESE English/Chinese menu on-screen display language
selection.
DEGAUSS Manually degauss the set
R Adjust white balance R at current colour temperature
(red adjustment).
G Adjust white balance G at current colour temperature
(green adjustment).
9300K Restore the current picture's colour temperature to
9300K.
6500K Restore the current picture's colour temperature to
6500K.
EXIT Exit the current OSD and store all the current
adjusted parameters.
6500 9300
R
R
G
G
R
G