Philips TL24A5T - Manual (Page 13)

13
TIMER settings
You can programme up to 7 TIMERS within any 31-day (1
month) period. You can select between a one-off, daily or
weekly recording.
The settings you made in the BASIC and ALARM SETTINGS
menu will apply.
You will then see a chart of all programmed TIMERS with
their dates, start times and stop times.
1 In the main menu select the ’TIMER SETTINGS’ line.
DATE START STOP MOD TIM
y -- --:-- --:-- --- ---
------------------------
S/J
CL OK/MENU
2 Activate a new TIMER line by pressing button OK .
3 Select the DATE, daily (D) or weekly (W), the START time,
the STOP time, TIMER active (TIM) and the recording
speed (MOD), using the outer rotary control
! "
. Alter the data, using the inner dial $ .
DATE START STOP MOD TIM
19 17:00 17:01 12H ON
------------------------
S/J
OK/MENU
4 When you have finished your entry in the TIMER line,
confirm with
OK .
5 Press button CL/CODE to delete a TIMER line.
6 Press button MENU twice. The video recorder is now
in standby and cannot be operated.
Notes:
* If a timer is programmed, ’TIMER’ will appear in the
display on the video recorder.
Interrupting a TIMER recording and
standby mode
You cannot operate the video recorder manually while a
programmed recording is being made.
To interrupt the programmed recording, press button
STOP/STANDBY h/m and hold for a few seconds.
Checking or changing a TIMER block
1 Press and hold button STOP/STANDBY h/m for several
seconds.
2 Press button MENU . Select the TIMER SETTINGS
menu.
3 The timer blocks will appear in time order on the screen.
4 To select the DATE, daily (D) or weekly (W), the START
time, the STOP time, TIMER active (TIM) and the record-
ing speed (MOD), use the outer rotary control
!
" . To alter the data, use the inner dial $ .
5 Finally press button OK . If you have changed the
settings, the new settings will now be stored in the video
recorder.
6 Press button MENU twice. The video recorder is now
in standby.
5. PROGRAMMING RECORDINGS