Philips 5150 - Manual (Page 6)

Handset 5
Handset
Registration
The additional handset will get full capability when it is registered to the base station (see p. 1).
You can register up to 6 handsets to the DECT 511 or DECT 515 base station.
Unplug and plug back in the mains supply to put the base in registration mode
With the additional handset, press to start the registration
Enter the 4-digit RC code written on the sticker
placed under the base station and press OK
To register a handset
To unregister a handset
Press to enter the carousel menu
Scroll to Handset and select
Note: should you have your handset serviced alone, please make sure it is unregistered from the
base station before taking it back to the repair centre.
Enter the 4-digit RC code and press OK
Scroll to Un-register handset and select
Scroll to Registration and select
Choose the handset to un-register from the list and press OK
This feature allows you to monitor the baby’s room. Place the handset in the room to be
monitored and you will hear the noise coming from the room on the additional handset.
Babysit mode
Press to enter the carousel menu
Scroll to Handset and select
To activate/deactivate the babysit mode
if there are at least 2 handsets
Press to select Babysit mode
Select ON or scroll to OFF and select
Note: an intercom is necessary to monitor the room (see page 8).
English
DECT5150_UK.qxd 28/06/04 16:47 Page 5