beautypg.com

Connect, Installez point de départ suggéré – Philips MNT410F User Manual

Page 3

background image

EN

3

12

FR

Connect

Connect coaxial cable to antenna
1
Connect supplied coaxial cable to the back

of the antenna.

2 Connect the coaxial cable from your cable

or satellite source to the back of the
antenna to the connector labeled IN
FROM CABLE
.

Connect coaxial cable to TV
Connect the supplied coaxial cable from the
antenna to the back of your TV using one of
the two methods illustrated*.

Connect power
Connect the power transformer from the
antenna an AC power outlet.

*If you have screw connections on your TV, attach the cable to the matching transformer and then to
your TV.You will need a band separator (not included) to access UHF reception. If you have a 75 ohm
jack and a set of UHF screw connectors on your TV, attach a coax cable to the 75 ohm jack.You will
need a band separator (not included) to access UHF reception.

Installez

Point de départ suggéré

Repérez la source du signal
Orientez l’antenne vers la source du signal
(transmetteur). De l’aide pour localiser la
source du signal est disponible sur le site
www.antennaweb.org

Pour la réception VHF, positionnez
l'antenne dipôle comme illustré.**
Dans le cas des canaux 2 à 6, déployez à
l’horizontale l’antenne dipôle sur toute sa
longueur.** Pour les canaux 7 à 13, ra
ccourcissez l’antenne dipôle d’environ 1/3 et
donnez-lui la forme d’un « V».

Pour la réception FM, positionnez
l'antenne dipôle comme illustré.**
Para la recepción FM, extienda los dipolos
hasta 30" y colóquelos en forma vertical u
horizontal**.

**Pour de meilleurs résultats, des réglages supplémentaires peuvent s’avérer nécessaires.

This manual is related to the following products: