Pioneer DV-400V-S - Manual (Page 47)

Additional information 09
47
En
HDMI troubleshooting
Problem Remedy
No HDMI audio output. • Check whether or not HDMI Out is set to Off . (See HDMI Out on
page 35.)
• This unit has been designed to be compliant with HDMI (High
Definition Multimedia Interface). Depending on the component you
have connected, unreliable signal transfers may result.
• If the front panel HDMI indicator is lit:
– You won’t hear any sound from the HDMI output if the source
component is only DVI/HDCP-compatible.
• If the front panel HDMI indicator is unlit then:
– Make sure that you’ve selected this player as the HDMI input in the
settings for the component you’re using. You may need to refer to the
instruction manual of the component to do this.
– Check that the HDMI cable is connected properly and that the cable
isn’t damaged.
– Check that components connected using the HDMI interface are
switched on and HDMI compatible.
No HDMI video output. • Make sure that you’ve selected this player as the HDMI input in the
settings for the component you’re using. You may need to refer to the
instruction manual of the component to do this.
• Check that the HDMI cable is connected properly and that the cable
isn’t damaged.
• Check that components connected using the HDMI interface are
switched on and HDMI compatible.
• This unit has been designed to be compliant with HDMI (High
Definition Multimedia Interface). Depending on the component you
have connected, using a DVI connection may result in unreliable
signal transfers.
• Make sure the resolution on this player matches that of the
component you have connected using HDMI. See
HDMI Resolution
on page 36 to change the HDMI resolution. See Resetting the output
resolution to the default setting with HDMI connection on page 15 if
you want to reset the output resolution.
No multichannel HDMI
audio. • Make sure the HDMI Out setting is set to Auto (see HDMI Out on
page 35 to do this). See also About the HDMI audio output settings on
page 41.
Component Out cannot
be set to Interlace. • You can use the Interlace setting if the HDMI Resolution is set to
720 x 480i .
A connected DVI
component (with HDCP)
doesn’t work with this
player. • This unit has been designed to be compliant with HDMI (High
Definition Multimedia Interface). Depending on the component you
have connected, using a DVI connection may result in unreliable
signal transfers.
DV400V_KUC_EN.book 47 ページ ２００７年３月１４日 水曜日 午後８時８分