Pioneer DV-400V-S - Manual (Page 14)

Connections 02
14
En
Connecting using HDMI
If you have a HDMI equipped monitor or
display, you can connect it to this player using
a commercially available HDMI cable.
The HDMI connector outputs uncompressed
digital video, as well as almost every kind of
digital audio that the player is compatible with,
including DVD-Video, Video CD/, CD, WMA,
MP3, MPEG-4 AAC, DivX video and WMV.
• Use an HDMI cable to connect the
HDMI OUT interconnect on this player to
an HDMI interconnect on a HDMI-
compatible monitor.
The arrow on the cable connector body should
be face up for correct alignment with the
connector on the player.
Note
• This unit has been designed to be
compliant with HDMI (High Definition
Multimedia Interface). Depending on the
component you have connected, using a
DVI connection may result in unreliable
signal transfers.
• When you change the component
connected to the HDMI output, you will
also need to change the HDMI settings to
match the new component (see
HDMI Out
on page 35, HDMI Resolution on page 36
and HDMI Color on page 36 to do this).
However, the settings for each component
are then stored in memory (for up to 2
components).
• The HDMI connection is compatible with
44.1 kHz/48 kHz, 16 bit/20 bit/24 bit 2
channel linear PCM signals, as well as
Doldy Digital, DTS and MPEG audio
bitstream.
P R
P B
Y
COMPONENT VIDEO OUT
VIDEO OUT
S-VIDEO OUT
DIGITAL AUDIO OUT AUDIO OUT
HDMI OUT
L
R
COAXIAL
HDMI-compatible display
To HDMI
interconnect
DV400V_KUC_EN.book 14 ページ ２００７年３月１４日 水曜日 午後８時８分