Polaroid BLL Generator - Manual (Page 17)

18 Software Installation
Running setup
These steps perform the initial installation of the Windows BLL Generator package.
•
Close all programs currently running.
•
Insert disk 1 of the Windows BLL Generator installation disk set, skip this step if you’ve
downloaded the Windows BLL Generator from the web site.
•
Press Start on the Windows tool bar, then select Run.
•
If you are using installation disks enter “a:setup“ in the “run“ dialog box as follows:
•
If you’ve downloaded the Windows BLL Generator or have received it from another source, use
the Browse button to point to it.
•
Press OK. Setup now prepares the installation.
•
Press Next after reading the introductory screen.
•
Press Next after reading the readme file.
•
You will be asked to select a destination directory at this time. It is strongly suggested that you
use the default directory offered by the installation program. Press Next.
•
Setup is now ready to install Windows BLL Generator. Press Next to install now.
•
Setup will install all program files at this time. Follow setup’s instructions to insert additional
disks if needed.
•
Press Finish to exit setup.
•
Setup may ask you to reboot your computer in rare cases.
The Windows BLL Generator program files are now installed.