Philips DC190B/37 - Manual (Page 13)

13
7 Product
information
Note
Product information is subject to change •
without prior notice.
Specifi cations
Amplifi er
Rated Output Power 2X1.5 W RMS
Signal to Noise Ratio >55 dB
MP3 Link
0.6 V RMS 10 kohm
Tuner
FM
Tuning Range 87.5 - 108 MHz
Tuning grid 50 KHz
Sensitivity
- Mono, 26dB S/N Ratio
- Stereo, 46dB S/N Ratio
<22 dBu
<45 dBu
Search Selectivity <28 dBu
Total Harmonic Distortion <3%
Signal to Noise Ratio
>45 dB
Stop alarm ring
1
When the alarm rings, press the
corresponding ALARM 1 or ALARM 2 .
The alarm stops but the alarm settings »
remain.
View the alarm settings
1
Press ALARM 1 or ALARM 2 .
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1
Press SLEEP repeatedly to select a set
period of time (in minutes).
When the sleep timer is activated, the »
display shows .
To deactivate sleep timer
1
Press SLEEP repeatedly until [OFF] (off)
is displayed.
When the sleep timer is deactivated,
»
disappears on the display.
Note
When the sleep timer is activated, the volume •
will gradually decrease.
Adjust display brightness
1
Press BRIGHTNESS CONTROL
repeatedly to select different levels of
display brightness.
English
EN