Philips DC190B/37 - Manual (Page 12)

12
5
Repeat steps 3-4 to set the minute.
6
Repeat steps 3-4 to select whether to
ring alarm on weekdays or at weekend.
“L XX(volume level)” begins to blink. »
7
Repeat steps 3-4 to set the maximum
alarm volume.
Set alarm mode
1
Adjust the WAKE TO iPod/RADIO/
BUZZ control to select the source for
the alarm.
When the alarm time comes, the »
selected iPod, radio or buzzer turns on.
Tip
If iPod source is selected but no iPod is loaded, •
the buzzer is selected automatically.
Activate and deactivate the alarm
timer
1
Press ALARM 1 or ALARM 2 repeatedly
to activate the timer.
If the timer is activated, » or is
displayed.
To deactivate the alarm timer, press •
ALARM 1 or ALARM 2 repeatedly
until is displayed.
If the timer is deactivated, » or
disappears.
Repeat alarm
1
When the alarm rings, press REPEAT
ALARM/BRIGHTNESS CONTROL .
The alarm repeats ringing minutes later. »
Tip
You can press • TUNING+/- to adjust interval
to repeat alarm.
Program radio stations
manually
You can program a maximum of 20 preset
radio stations.
1
Tune to a radio station.
2
Press TIME SET/AUTO SCAN to activate
the program mode.
The preset number begins to blink. »
3
Press PRESET +/- to select a number.
4
Press TIME SET/AUTO SCAN to
confi rm.
5
Repeat the above steps to program other
stations.
Note
To overwrite a programmed station, store •
another station in its place.
Select a preset radio station
1
Press PRESET +/- to select a preset
number.
6 Other features
Set the alarm timer
You can set two alarms which go off at different
time.
1
Ensure that you have set the clock
correctly.
2
Press and hold ALARM 1 or ALARM 2
for 2 seconds.
» or and hour digits begin to
blink.
3
Press TUNING +/- repeatedly to set the
hour.
4
Press ALARM 1 or ALARM 2 to confi rm.
»
or and minute digits begin
to blink.
EN