Philips DC190B/37 - Manual (Page 11)

11
3
Start to play the device (see the device
user manual).
5 Listen to radio
Note
Only FM radio reception is available on this •
unit.
Tune to a radio station
Tip
Position the antenna as far as possible from •
TV, VCR or other radiation source.
For optimal reception, fully extend and adjust •
the position of the antenna.
1
Press SOURCE repeatedly to select FM
tuner.
2
Press and hold TUNING +/- for more
than 2 seconds.
The radio tunes to a station with »
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a weak station, press •
TUNING +/- repeatedly until you
fi nd optimal reception.
Program radio stations
automatically
You can program a maximum of 20 preset
radio stations.
1
In the tuner mode, press and hold TIME
SET/AUTO SCAN for more than 2
seconds to activate automatic program
mode.
All available stations are programmed »
in the order of waveband reception
strength.
The fi rst programmed radio station is
»
broadcast automatically.
2
Place the iPod in the dock.
Remove the iPod
1
Pull the iPod out of the dock.
Listen to the iPod
1
Ensure that the iPod is loaded correctly.
2
Press SOURCE repeatedly to select iPod
source.
The connected iPod plays automatically. »
To pause/resume play, press • .
To skip to a track, press • / .
To search during play, press and •
hold / , then release to resume
normal play.
Charge the iPod
When the unit is connected to power, the
docked iPod begins to charge.
Play from an external device
You can also listen to an external audio device
through this unit.
1
Press SOURCE repeatedly to select MP3
link source.
2
Connect the supplied MP3 link cable to:
the • MP3-LINK jack (3.5mm) on the
back of the unit.
the headphone jack on an external
•
device.
English
EN