beautypg.com

Maintenance – Polaris Xer User Manual

Page 76

background image

73

ADULT SECTION

Maintenance

Lubrication Recommendations

Inspect and lubricate all greaseable components at the intervals outlined

in the Periodic Maintenance Chart beginning on page 50.
Controls and Linkage

Lubricate all bushings, spindle shafts, and tie rod ends with a light coat

of oil or grease. Lubricate throttle and brake controls and cables with

Polaris Premium All Season Grease. Force a small amount of lubricant

down the cable.
Bearings

Always grease drive shaft clutch side bearings with a high quality bear-

ing grease to prevent corrosion, which will destroy the bearings.
Electrical Connections

Separate the electrical connector blocks and clean corrosive build-up

from the connectors. Lubricate the blocks with dielectric grease and re-

connect. Replace worn or frayed electrical wire and connectors. Be sure

wiring harnesses are properly secured away from sharp edges, steering

linkage, moving parts, and hot exhaust components.