Pioneer VSX 920 - Manual (Page 71)

Other connections 10
71
En
English
Français
Deutsch
Nederlands
Italiano
Español
Saving channel presets
This receiver can memorize up to 30 channels,
stored.
1 Select the channel you want to
memorize.
See Selecting channels and browsing by genre
above.
2 Press TUNER EDIT.
The display shows a blinking memory number.
3 Press / to select the channel preset
you want.
You can also use the number buttons to select
a preset.
4 Press ENTER.
After pressing ENTER, the preset number stop
blinking and the receiver stores the SIRIUS
channel.
Listening to channel presets
You will need to have some presets stored to do
this.
• Press
/ to select the channel preset
you want.
• You can also use the number buttons on
the remote control to recall the channel
preset.
Using the SIRIUS Menu
The SIRIUS Menu provides additional SIRIUS
Radio features.
1 Press TOP MENU.
2 Use / to select a menu item then
press ENTER.
Choose between the following menu items:
• ALL CHANNEL SKIP CLEAR – Clear the
channel skip function set by the
SiriusConnect tuner. If the channel skip
function is not cleared here, not all
channels are displayed because this
receiver stores the channels set for
skipping in the SiriusConnect tuner.
• PARENTAL LOCK – Use / and ENTER
to select channels you would like to place
under parental lock. Channels put under
parental lock are not displayed in the
Channel Guide, but may be accessed by
directly inputting their channel number
and providing the parental lock password.
• PASSWORD SET – Set the parental lock
password.
3 When you’re finished press TOP MENU
to return to the reception display.
Tip
• You can reset the channel presets,
parental lock and Password Set in
Resetting the main unit on page 78.
VSX-920_UCSMXCN_En.book 71 ページ ２０１０年１月２１日 木曜日 午前９時４３分