Python LIQUID COOLED MILLERMATIC COMPATIBLE 248-8XX - Manual (Page 15)

Liquid Cooled Millermatic Compatible™ Python ® Owner's Manual - Page 4
Section C Options and Accessories
Insulated Drive Roll Kits
Used to prevent preheating of the wire which may soften it and clog the liner.
This picking up of current at the drive rolls rather than at the contact tip is
usually not a problem unless using too large of a contact tip or excessively
oxidized aluminum wire.
Insulated Groove Drive Roll Kit ......................................................005-0640
For .030" (0.8 mm) dia. aluminum wire. Includes insulated drive roll and idler
roll assy.
Insulated Groove Drive Roll Kit ......................................................005-0716
For .035" (0.9 mm) dia. aluminum wire. Includes insulated drive roll
and idler roll assy.
Insulated Groove Drive Roll Kit ......................................................005-0642
For .040" (1.0 mm) dia. aluminum wire. Includes insulated drive roll
and idler roll assy.
Insulated Groove Drive Roll Kit ......................................................005-0718
For 3/64" (1.2 mm) dia. aluminum wire. Includes insulated drive roll
and idler roll assy.
Insulated Groove Drive Roll Kit ......................................................005-0644
For .062" (1.6 mm) dia. aluminum wire. Includes insulated drive roll
and idler roll assy.
Replacement Kits
Handle Kit Gun .................................................................................005-0699
Left and right handles, screws and drive roll door, as a replacement for all
Millermatic Compatible™ Python ® guns.
Trigger Kit .........................................................................................005-0694
Trigger adjustment kit includes a spring and sensitivity adjustment screw
replacement for all Millermatic Compatible™ Python ® guns.
Micro Switch Kit ...............................................................................005-0701
Replacement micro switch assembly for all Millermatic Compatible™ Python ®
guns.
Potentiometer Kit .............................................................................005-0695
Replacement potentiometer assembly for all Millermatic Compatible™
Python ® guns.
Barrel Insulator Kit ..........................................................................005-0696
Replacement barrel insulator and taper lock nut.
Conduits
Flat spiral steel conduit for steel & cored wire.
15 ft./4.5m ..................................................................................... 615-0621-15
25 ft./7.6m ..................................................................................... 615-0621-25
35 ft/10.7m .................................................................................... 615-0621-35
50 ft./15.2m ................................................................................... 615-0621-50
Snake Skins
A Snake Skin protective cover is standard on the Millermatic Compatible™
Python ® . See below for replacement part numbers.
15 ft./4.5m .......................................................................................... 931-0110
25 ft./7.6m .......................................................................................... 931-0122
35 ft/10.7m ......................................................................................... 931-0132
50 ft./15.2m ........................................................................................ 931-0123