Planet Technology 200Mbps Powerline Ethernet Bridge PL-501-EU/US/UK - Manual (Page 8)

1. Insert the CD into the CD-ROM drive to initiate the Autorun
program. Once completed, a menu screen will appear.
2. Click on the “Powerline Configuration Utility” hyperlink in
PL-501 field to start the installation. If the menu screen is
not shown, you can start the installation as follows.
• Click on Start Menu/ Run.
• Enter “E:\Utility\setup.exe” in the appeared box, where
“E” is the letter of your CD-ROM drive.
• Click on “OK” button.
3. The utility will be installed into your computer
and a new icon called “PowerPacket Utility”
will appear on your desktop.
Note
This utility is only for Windows 2000, 2003, XP,
and Vista.
Further Configuration
If you want to configure more detail settings of PL-501, please
refer to user’s manual on the bundled CD.
If you have any difficulty on resolving the problem while
installing or using the PL-501, please contact the dealer where
you purchased this product or you can contact PLANET directly
at the following email address: [email protected]