Philips MCM275 - Manual (Page 19)

English
19
CD
Programming tracks
You may store up to 40 tracks in the desired
sequence. If you like, store any track more than
once.
1
In the stop position, press PROGRAM to star t
programming
➜ flashes
➜ Audio CD: Display shows
PROG and current
track number
MP3/WMA: Display shows current album/
track number
2
Press 4 / ¢ once or repeatedly until the
desired track number appears in the display
● MP3/WMA: press ALBUM/ PRESET and
4 / ¢ to select the desired albumand
track
3
Press PROGRAM to confirm
➜ Display shows briefly the number of tracks
programmed
➜ Then, the display shows the track number
you just stored
4
Repeat steps 2-3 to select and store all desired
tracks.
➜ FULL is displayed if you attempt to program
more than 40 tracks
5
Press ÉÅ play the program
Helpful hints:
– The set will return to the stop position if no
button is pressed within 90 seconds.
disappears. To resume programming, press
PROGRAM.
– MP3/WMA: When playing a program, use of
ALBUM/ PRESET are void.
Erasing the program
You can erase the contents of the memory by:
● Press STOP
9
– once if in the stop position;
– twice during playback;
● Press STANDBY-ON y
● Select another sound source
● Open the CD door
➜ disappears.
CLEAR scrolls
001-029_MCM275_93_Eng 4/24/06, 9:04 AM 19