Panasonic DMC-FZ2A - Manual (Page 59)

Recording images (advanced)
59
ª To set manually (White set)
Here the white set mode of white balance is
explained.
[Preparation]
• Set the mode dial except for [
]/[ ]/
[ ]. (P25)
1 Press the [MENU] button.
2 Press 3/4 to select [W.BALANCE].
3 Press 1 to set to white set [ ].
Only when setting the white balance again
4 Press 1.
• The message “AIM THE CAMERA AT
A WHITE SURFACE AND PRESS THE
SHUTTER” is displayed.
5 Aim the camera at a white paper 1 or
similar objects so that it completely
fills the frame to white on the screen
and press the shutter button all the
way.
• White balance is set.
6 Press the [MENU] button.
• The menu will disappear.
• When taking a picture with the flash after
setting the white balance manually, the
white balance may not be properly adjusted.
We recommend to set the white balance to
[AUTO] when using the flash.
1,6
5
2,3,4
WHITE SET
A WHITE SURFACE AND
PRESS THE SHUTTER
AIM THE CAMERA AT
CANCEL
4
1600 PICT.SIZE
QUALITY
REC 1/4 SETUP
AE MODE P AE
2,3
W.BALANCE
CANCEL
AUTO
MENU
SELECT SET EXIT MENU
FZ2-A.book 59 ページ ２００３年８月６日 水曜日 午前１０時０分