Panasonic DMC-FZ2A - Manual (Page 46)

Recording images (advanced)
46
Taking Pictures with Shutter-priority AE
When the shutter speed is set, the aperture
value is set automatically according to the
subject brightness.
e.g.: when you want to record a moving
subject, set the shutter speed higher to make
the picture stable as if the subject stopped.
1 Set the mode dial to [P/A/S]. (P25)
2 Press the [MENU] button.
3 Press 3/4 to select [AE MODE].
4 Press 1 to set to [S].
5 Press the [MENU] button.
• The menu will disappear.
6 Press 3.
7 Press 2/1 to set the shutter speed.
8 Press the 4/[REVIEW/SET] button.
• The adjustment display will disappear.
9 Take a picture.
• The brightness of the LCD monitor/Viewfinder may differ from that of the actual
images. Check it using review function or setting to playback mode.
• The recordable range is between 120 cm – ¶ (Tele) and 5 cm – ¶ (Wide).
• In shutter-priority AE mode [ ], it is not possible to choose the settings listed
below.
– Slow sync./Red-eye reduction [ ] (P36) of the built-in flash
– [AUTO] of ISO sensitivity (P61)
• The available setting range of the shutter speed is adjustable from 8 seconds to
1/2000th.
• When the shutter speed is slow, the use of a tripod is recommended.
• If the aperture value is not properly set, the color of the F and the shutter speed
values on the LCD monitor/Viewfinder become red.
• If the shutter speed is faster than 1/500th, the aperture value is limited.
2,5
3,4,6,7,8
9
1
REC 1/4 SETUP
3,4
W.BALANCE AUTO
PICT.SIZE
AE MODE
QUALITY
A S
1600
AE
P
SELECT SET EXIT MENU
7
SHUTTER SPEED
SELECT EXIT
1/30
S
FZ2-A.book 46 ページ ２００３年８月６日 水曜日 午前１０時０分