Philips DECT 122 - Manual (Page 21)

Advanced Settings 20
Advanced Settings
✦ To change the recall time
Press ADVANCE SET RECALL TIME
press Down 3 times
to confirm.
scroll to select SHORT
or LONG
✦ To change the dial mode
By default your phone is pre-configured with the appropriate dial mode for your
country and you don’t have to change this setting.
Press ADVANCE SET
press Down 3 times
DIAL MODE to confirm.
press Down 1 time select TONE or PULSE
✦ Local area code setting
If your local PSTN sends the CID with local area code attached, it is necessary to
filter out the local area code when dial back from call log.The AREA CODE func-
tion allows you to remove the local area code from the call log entries.The local
area code can be set from 1 to 4 digits.The default setting is blank.
Press ADVANCE SET
press Down 3 times
AREA CODE to view the current setting
press Down 2 times
to save.
enter the new
area code*
This option is
useful when
using operator
services.
*The maxi-
mums for the
area code is 4
digits.
DECT122_GBIE_09.qxd 27.09.2005 17:06 Seite 20