Ha remote pin assignment table, Dimensions, Ha remote pin assignment table dimensions – Pacific Digital AD8HR User Manual
Page 15: 15 ha remote pin assignment table dimensions
Appendix
15
HA REMOTE Pin Assignment Table
Dimensions
* If you do not intend to rack mount the AD8HR, attach the included rubber feet to the bottom
surface of the unit.
Attach the rubber feet in the positions marked by small circles on the bottom.
Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha
Corp. reserves the right to change or modify products or specifications at any time without prior notice.
Since specifications, equipment or options may not be the same in every locale, please check with your
Yamaha dealer.
European models
Purchaser/User Information specified in EN55103-1 and EN55103-2.
Inrush Current: 35 A
Conforms to Environments: E1, E2, E3 and E4
Pin
Signal Name
Pin
Signal Name
1
N.C.
6
RX+/DSR
*1
2
RX-/RXD
*1
*1. RS422/PC
7
RTS
3
TX-/TXD
*1
8
CTS
4
TX+/DTR
*1
9
N.C.
5
GND
11
480
44
19
353.5
383.5
350
65
50
250
45
Unit mm
When the
included rubber
feet are
attached*