Powermatic PJ1696 - Manual (Page 8)

8
SPECIFICATIONS: PJ1696 Jointer
Stock No. .............................................................................................................................................. 1791283
Motor .................................................................................................................. 7-1/2HP, 3Ph, 230/460V, 60Hz
Maximum width cutting capacity.....................................................................................................16" (406 mm)
Maximum depth cutting capacity .................................................................................................... 3/4" (19 mm)
Cuts per minute........................................................................................................................................ 20,800
Table size ....................................................................................................16" W x 96" L (406mm x 2438 mm)
Table height from floor .............................................................................................................37-1/2" (800 mm)
Fence size ................................................................................................47-1/4" L x 5-1/4" H (1200 x 133 mm)
Fence tilt ............................................................................................ 45 degrees forward, 45 degrees backward
Positive stops............................................................................................................. 45 deg., 90 deg., 135 deg.
Cutterhead speed............................................................................................................................... 5200 RPM
Number of knife inserts ......................................................................................................56 standard, 2 rabbet
Cutterhead diameter ......................................................................................................................... 4" (98 mm)
Rabbeting capacity......................................................................................................................... 3/4" (19 mm)
Dust connection diameter................................................................................................................ 6" (152 mm)
Overall dimension .................................................................... 46" L x 96" W x 43" H (1168 x 2438 x 1092 mm)
Packing dimension ...............................................................39" L x 102" W x 29-1/2" H (991 x 2591 x 749 mm)
Net weight ............................................................................................................................ 1280 lbs. (582 kgs.)
Gross weight ........................................................................................................................ 1400 lbs. (636 kgs.)
NOTE: The above specifications were current at the time this manual was published, but because of our
policy of continuous improvement, Powermatic reserves the right to change specifications without notice and
without incurring obligations.