Before the acl configure – Planet Technology FGSW-2624SF User Manual

Page 77

Text mode
Original mode

- 77 -

Before the ACL Configure …

Notice

–

It is important to set the VLAN mode to “Port-Based” or “802.1Q” VLAN before you start the ACL configure. Due to the
ACL will check the VLAN ID if necessary, the VLAN mode must be set to Port-Based or 802.1Q mode. And once the
VLAN mode is changed, the system has to reboot to apply the new settings.

To set up the VLAN mode, click the “VLAN Configuration” at the Function Menu tree. The VLAN mode page appears as
the following:

This manual is related to the following products:

FGSW-2402VS