Planet Technology XRT-401E - Manual (Page 10)

10
2.3 Dial-Up xDSL (PPPoE)
Select Dial-Up xDSL (PPPoE) if your ISP requires the PPPoE
protocol to connect you to the Internet. Your ISP should provide
all the information required in this section.
Parameter Description
User Name
Enter the User Name provided by your
ISP for the PPPoE connection.
Password
Enter the Password provided by your ISP
for the PPPoE connection.
Retype
Password
Re-enter the Password for confirmation.
Service Name
This is optional. Enter the Service name
should your ISP requires it, otherwise
leave it blank.
MTU
This is optional. You can specify the
maximum size of your transmission
packet to the Internet. Leave it as it is
if you do not wish to set a maximum
packet size. (The default settings is 1492)