Pioneer SVM-1000 - Manual (Page 43)

HARDWARE SETUP
43
En
MASTER OUT SETTINGS
1 Touch [MASTER OUT].
The MASTER OUT setting screen will be displayed.
2 Choose settings by touching [ ] or [].
3 Touch [SAVE] to save the settings.
The settings will not be implemented unless [SAVE] is
touched.
LCD SETTINGS
1 Touch [LCD].
The LCD setting screen will be displayed.
2 Choose settings by touching [ ] or [].
3 Touch [SAVE] to save the settings.
The settings will not be implemented unless [SAVE] is
touched.
MONITOR OUT SETTINGS
1 Touch [MONITOR OUT].
The MONITOR OUT setting screen will be displayed.
2 Choose settings by touching [ ] or [].
3 Touch [SAVE] to save the settings.
The settings will not be implemented unless [SAVE] is
touched.
BRIGHTNESS Adjusts the brightness of the master output
monitor.
CONTRAST Adjusts the contrast of the master output
monitor.
COLOR Adjusts the color tone of the master output
monitor.
• Cannot be adjusted when the PAL video
system is used.
• Component outputs cannot be adjusted.
SATURATION Adjusts the saturation of the master output
monitor.
SHARPNESS Adjusts the sharpness of the master output
monitor.
BACK LIGHT Adjust the backlight of the LCD.
BRIGHTNESS Adjusts the brightness of the monitor output.
CONTRAST Adjusts the contrast of the monitor output.
COLOR Adjusts the color tone of the monitor output.
SATURATION Adjusts the saturation of the monitor output.
SHARPNESS Adjusts the sharpness of the monitor output.
SVM-1000_B_En.book 43 ページ ２００７年１１月２６日 月曜日 午後１２時５４分