Planet Technology ENW-9607/9607M - Manual (Page 13)

10
3.3 Installing Driver To Windows NT
1. Install ENW-9607M into your PC ’s PCI slot.
2. Power on the PC and insert Driver Disk into CD-ROM drive.
3. Click START -> SETTINGS -> CONTROL PANEL -> NETWORK.
4. Select ADAPTERS.
5. Click “ADD” button.
6. Select “HAVE DISK”.
7. Assume "E" is the CD-ROM drive. Enter the path as “E:\Drivers\ENW-9607M\WinNT.
8. Click OK.
9. Select the “PLANET ENW-9607M 1000Base-SX/LX SFP Gigabit Ethernet Adapter (Marvell
Chip) ” entry that matches your adapter.
10. Click OK.
11. Select the appropriate configuration.
12. Click OK.
13. Restart your system.
?
Note:
We strongly recommend you to install the latest Windows NT4 Service Pack
AFTER successful installation of the driver
3.4 Installing Driver To Linux
1. Login as 'root'.
2. Unpack the driver installation package using the command
# tar xfvj install-???.tar.bz2
or
# bunzip2 -c install-???.tar.bz2 | tar xfv -
3. To start the driver build process, go to the directory DriverInstall