Polaroid PDM-1040 - Manual (Page 44)

44
Other possibilities:
Static or other external interference may cause the player function abnormally. In order to
recover normal status, unplug the power-supply cord and then plug it into the outlet again
to reset the player. If problems still exist, cut off the power supply and consult your service
center or the qualified technician.
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
There is no picture.
The LCD may be off or not
be in correct video mode. Turn on the LCD and choose
the correct video mode.
The system connection may
be not correct. Connect the system
correctly.
The unit may be not in AV
out mode. Switch AV tab on the bottom
of the unit to out.
Poor AV performance.
The disc may be dirty or
warped.
Clean or change the disc.
The remote control
does not work
There may be some
obstructions between the
remote control and the
player.
Remove the obstruction
between the remote control
and the player.
The remote control may not
be pointed at the player. Point the remote control at
the player directly.
The batteries of remote
control may be out of power
or weak.
Make sure the polarity of
each battery is correct.
The batteries of remote
control may not be inserted
correctly.
Replace the batteries.
Troubleshooting