Polaroid P100 - Manual (Page 31)

24
Your P100 Printer includes a simple cleaning system using the Pre-Saturated
Cleaning Cards provided. The regular use of these cards will clean and maintain
important parts of your printer: including the Print Head, and Transport Rollers.
WHEN TO CLEAN
When LCD screen reports message.
HOW TO CLEAN
1. Leave power on.
Open Cover and release Print Head Bracket
to remove ribbon.
Close Print Head bracket.
Close Cover. Remove cards from Card Feeder.
2. Insert one Pre-Saturated Cleaning Card
(provided) through slot on the side of the Card
Feeder Cover.
3. Press the right Panel Button for a few
seconds. The card will feed into printer and carry
out the cleaning process. Repeat the process with
a new Cleaning Card if necessary.
Allow 2 minutes to dry before re-using the printer.
Although the CLEAN PRINTER message is
displayed until the cleaning process has been
performed, the printer will continue to operate.
Note: For a printer cleaning prior to the WHEN TO CLEAN signal, press the Left Panel
Button until the LCD screen shows "CLEANING MENU". Press the right Panel Button to
select and one more time again to run the cleaning process (Repeat first steps 1 & 2 above).
CLEAN PRINTER
4.1
Cleaning System
CLEANING