Polaroid P100 - Manual (Page 10)

Your P100 printer has an LCD Display, two LED's and two Panel Buttons.
3
The 16 character LCD Display is used for :
• Showing the printer's current status
• Providing operator and service messages (Chapter 5)
The two LED's are used for :
• Green: Power LED
• Amber: Alert LED (with beeper)
This Alert LED is on when an error condition exists.
The Beeper will sound three alert "Beeps" and the LCD Display will show
the associated error message.
The Menu Button (left) is a push button used for:
• Bringing printer into Menu Mode when pressed with the printer showing
READY on the LCD Display.
• Using in Menu Mode to scroll through Menu Options.
The Clear Button (right) is a push button used for:
• Clearing an error status (when LCD Display shows an error report and
Alert LED is on).
• Invoking automatic retry of the operation which gave the error.
• Selecting a Menu Option when in Menu Mode.
NOTE: the buttons beep when pressed
LCD Display
Clear Button
[Select]
Power
LED
Menu Button [Next] Alert LED
1.2
Indicators and Controls
GETTING STARTED
LCD Display :
LED's :
PANEL BUTTONS: