Philips 5616X - Manual (Page 13)

To Clean Trimmer
1 Brush the outside of Trimmer after every use.
2 Lubricate Trimmer teeth twice a year with
Norelco Razor Lubricant, model AL80, or one
drop of mineral oil.
3 The Trimmer may be flipped open to clean the
inside (Fig. 9).
Important
• Always switch Razor OFF and remove from
charging base before cleaning.
• Always store Razor with Protective Razor Head
Cap on shaving heads.
• Never clean, remove or replace head assembly
while motor is on.
• Do not apply pressure to combs. Do not touch
razor heads with hard objects as this may dent
or damage precision-made slotted combs.
• Do not use razor if combs are damaged or broken.
Facial injury may occur.
After Each Use
1 Switch Razor OFF.
2 Press the Razor Head Release Button located
under razor heads on front side of Razor (Fig. 7).
3 Flip open the Razor Head Assembly and clean
the razor heads and hair chamber by running
under hot water (Fig. 10 & Fig. 11). Water from
the tap should be on a hot setting BUT BE
CAREFUL TO TEST WATER FIRST SO AS NOT
TO BURN OR SCALD HANDS.
4 Shake off excess water and close Razor Head
Assembly.
Maintenance
Instructions
9
10
11
8.